Safety Brakes safe through fail-safe principle

ROBA®-linearstop

Hydraulic – Pneumatic – Electromagnetic

Highlights and Advantages
  • Safety brake system according to the fail-safe principle
  • Backlash-free force transmission having an effect on both sides
  • No self-reinforcement during clamping
  • Clearing the clamping device is not necessary
  • Maximum performance density
  • Suitable for EMERGENCY STOP braking actions
  • Suitable for dynamic braking actions
  • Minimum reaction times
  • Integrated switching condition monitoring possible
  • Long service lifetime
  • Can easily be integrated into existing constructions

 

ROBA®-linearstop hydraulic

Type 380.01 _.0

Clamps a piston rod via a spring-loaded device at the exact position required and backlash-free. The brake is opened with a hydraulic pressure of 35 – 75 bar.

Suitable for EMERGENCY STOP braking actions.

Nominal holding force: 4000 – 50000 N

For data and description, please see pages 6/7 in our catalog.


 
 

ROBA®-linearstop pneumatic

Type 381.0__._ (acc. Trade Association test regulation)
Clamps a piston rod via a spring-loaded device at the exact position required and backlash-free. The brake is opened with a pneumatic pressure of 4 – 6 bar.

Suitable for EMERGENCY STOP braking actions (tested by TÜV-SÜD, German Technical Inspectorate).

Type 381. 1 _ _ . _ for dynamic braking actions (acc. Trade Association test regulation)
Clamps and brakes a piston rod via a springloaded device at the exact position required and backlash-free. The brake is opened with a pneumatic pressure of 4 – 6 bar. If the Technical Data are observed, more than 20,000 dynamic braking actions are possible (tested by the TÜV-SÜD, German Technical Inspectorate).

Nominal holding force: 450 – 40000 N

For data and description, please see pages 8/9 in our catalog.


 

ROBA®-linearstop electromagnetic

Type 382.0__._

Clamps a piston rod via a spring-loaded device at the exact position required and backlash-free. Brake is opened through electromagnetic actuation with DC current.

Nominal holding force: 200 – 17000 N

For data and description, please see pages 12/13 in our catalog.

 

Contact us

Please feel free to contact us anytime, should you not have found the required information (CAD data, Installation and Operational Instructions etc.) in our download section.

We will get back to you as soon as possible.

Downloads

Documentations

ROBA®-linearstop

Installation and Operational Instructions

380.0__.0 (b.380.en.pdf)
ROBA-linearstop Brakes hydraulic Type 380.01_.0 Sizes 10 - 40
381.0__._ / 381.1__._ (b.381.1.en.pdf)
ROBA-linearstop Type 381.0__._/381.1__._ Sizes 20 - 80
382.0__.0_ (b.382.en.pdf)
ROBA-linearstop Type 382.0__.0_ Sizes 20 - 80