We make the generation of clean energy safe and efficient
mayr ® power transmission bundles its know-how and decades of experience in the offshore sector in safety brakes for pitch and azimuth drives. The safety brakes for wind power plants represent maximum fail-safe function, minimum downtimes and constructional design diversity, and reduce the operating costs. The company sets new standards with its Cold Climate Version, which is certified for applications to -40°C by Germanic Lloyd (GL).
And the portfolio is also wide for torque limiters. It extends from overload systems for wind turbine gearboxes via torque limiters for climbing aid drives in the tower and switchable clutches for the drives of maintenance and installation platforms, right up to high-performance large clutches for gearbox test stands.
Check this before you select a Wind Power Brake - Flyer (PDF)
Find your product
Click in the drawing on the left on a market point and find the mayr® product suitable for your application.
Pitch brakes
ROBA-stop® M CCV, the certified Cold Climate safety brake
- Maximised fail-safe function
- Minimum downtimes
- Improved competitive ability
- Low procurement costs
- Reduction of operating costs
- Constructional freedom of design
- GL certification up to -40 °C
Monitoring of electromagnetic brakes
The ROBA®-brake-checker for a permanent overview of the brake operating conditions
- Permanent brake monitoring of switching condition, temperature, wear without sensors
- Maximum operating safety through the detection of errors prior to their occurrence
- Plannable, targeted maintenance processes
- Control and monitoring function in one
- No failures through icing and error signals through friction dust
- No critical spark formation on the switching contactor – increase in system availability
Yaw brakes
ROBA-stop® M CCV, the certified Cold Climate safety brake
- Maximised fail-safe function
- Minimum downtimes
- Improved competitive ability
- Low procurement costs
- Reduction of operating costs
- Constructional freedom of design
- GL certification up to -40 °C
Monitoring of electromagnetic brakes
The ROBA®-brake-checker for a permanent overview of the brake operating conditions
- Permanent brake monitoring of switching condition, temperature, wear without sensors
- Maximum operating safety through the detection of errors prior to their occurrence
- Plannable, targeted maintenance processes
- Control and monitoring function in one
- No failures through icing and error signals through friction dust
- No critical spark formation on the switching contactor – increase in system availability
Yaw brakes
ROBA-stop® M CCV, the certified Cold Climate safety brake
- Maximised fail-safe function
- Minimum downtimes
- Improved competitive ability
- Low procurement costs
- Reduction of operating costs
- Constructional freedom of design
- GL certification up to -40 °C
Monitoring of electromagnetic brakes
The ROBA®-brake-checker for a permanent overview of the brake operating conditions
- Permanent brake monitoring of switching condition, temperature, wear without sensors
- Maximum operating safety through the detection of errors prior to their occurrence
- Plannable, targeted maintenance processes
- Control and monitoring function in one
- No failures through icing and error signals through friction dust
- No critical spark formation on the switching contactor – increase in system availability
Overload systems for wind turbine gearboxes
The innovative, high-performance torque limiter for the ROBA®-slip hub construction series
- Load holding, robust slip clutch
- Suitable for high friction work values and high torques
- Reliable protection of the gearbox
Safety brakes for passenger service lifts
ROBA-stop®-M, the robust, cost-effective safety brake
- Easy installation
- Short switching times
- Constructionally specified and inspected nominal air gap
- Magnetic coil is designed for a relative duty cycle of 100 %
- Maintenance-free over the entire service lifetime of the rotor
Safety brakes for passenger service lifts
ROBA-stop®-silenzio®, the quietest safety brake for elevator drives
- Single or double brake
- Short construction length, as the brake has no intermediate flange
- Easy installation
- Consistently low noise level for the entire service lifetime
Torque limiters for climbing aid drives
ROBA®-slip hub, the load-holding, frictionally-locking torque limiter
- Load-holding slip clutch
- Robust and reliable
- Easy installation and handling
- Available for low and high torques and friction work