EN
DE FR IT ES PT ZH TR JA
mayr Antriebstechnik Logo Text
Brakes - Stop safely, stop reliably

Brakes: Stop safely, stop reliably

Brakes from mayr® power transmission are used in many applications. We distinguish between two product families:

  • Spring-applied safety brakes. They operate according to the fail-safe principle and are closed (brake on) in the de-energised state. Spring-applied brakes are primarily designed as holding brakes but are also suitable for emergency stops and, depending on the design, can also be used for dynamic braking.
  • Energise to Engage brakes. These apply torque when the brake is powered and are open (brake off) when the current is switched off. They are not classed as safety brakes. The electromagnetic brakes are particularly suitable for precise positioning and reliable stopping up to their wear limit.
Brochure Contact now
ROBA®-servostop® Classic: Classic spring-applied safety brake for servomotors configurable
ROBA®-servostop® Classic
Shaft Mounted Brakes
  • High braking torque
  • Wear-resistant - large number of emergency stops allowed
  • Easy installation
Configure now
All product information
ROBA®-servostop® Cobot: Spring-applied safety brake for lightweight robots configurable
ROBA®-servostop® Cobot
Shaft Mounted Brakes
  • Can be integrated into very small installation spaces
  • Ideal for hollow shafts
  • High performance density
  • Low energy consumption
Configure now
All product information
ROBA®-servostop® Lean: Lean spring-applied safety brake for servomotors configurable
ROBA®-servostop® Lean
Shaft Mounted Brakes
  • Slim design
  • High performance density
  • Low energy consumption
  • Easy installation
Configure now
All product information
ROBA-stop®-M: Robust motor brake configurable
ROBA-stop®-M
Shaft Mounted Brakes
  • Maintenance-free
  • Easy installation
  • Enclosed brake housing
  • Class of insulation F
  • Can be used for 100 % duty cycle
Configure now
All product information
ROBA-stop®-silenzio®: The quietest safety brake for elevator and stage drives configurable
ROBA-stop®-silenzio®
Shaft Mounted Brakes
  • Dual circuit brake
  • Function monitoring possible
  • Easy installation
  • Preset air gap
  • Low noise level
Configure now
All product information
ROBA®-linearstop P: Pneumatic configurable
ROBA®-linearstop P
Piston Rod Brakes
  • Reliable due to fail-safe principle
  • Short switching times
  • High performance density
  • Long service lifetime
  • Clamps without self-reinforcement
Configure now
All product information
ROBA-stop®-M Servo-Pitch: For servomotors and regulated AC drives
ROBA-stop®-M Servo-Pitch
Shaft Mounted Brakes
  • Designed especially for pitch drives
  • Enclosed brake housing
  • High performance density
  • High permitted friction work
Request now
All product information
ROBA-stop®-M Eco: Robust and reliable
ROBA-stop®-M Eco
Shaft Mounted Brakes
  • Cost-effective
  • Easy installation
  • Maintenance-free
Request now
All product information
ROBA®-diskstop®: Safety brake system for brake disks
ROBA®-diskstop®
Caliper Brakes
  • Easy installation
  • Low-maintenance
  • Class of insulation F
  • Reliable due to fail-safe principle
  • For large braking torques
Request now
All product information
ROBA®-guidestop electromagnetic: Electromagnetic guidestop
ROBA®-guidestop electromagnetic
Rail Brakes
  • Backlash-free
  • High stiffness
  • High holding forces
  • *Switching status monitoring
Request now
All product information
ROBA®-guidestop hydraulic: Hydraulic safety brake and clamping unit for professional linear guideways
ROBA®-guidestop hydraulic
Rail Brakes
  • Backlash-free
  • High stiffness
  • High holding forces
  • *Switching status monitoring
Request now
All product information
ROBA®-guidestop pneumatic: Safety brake and backlash-free, highly rigid clamping unit for profiled rail guides
ROBA®-guidestop pneumatic
Rail Brakes
  • Backlash-free
  • High stiffness
  • High holding forces
  • *Switching status monitoring
Request now
All product information
ROBA®-linearstop E: Electromagnetic
ROBA®-linearstop E
Piston Rod Brakes
  • Reliable due to fail-safe principle
  • Short switching times
  • High performance density
  • Long service lifetime
  • Clamps without self-reinforcement
Request now
All product information
ROBA®-linearstop H: Hydraulic
ROBA®-linearstop H
Piston Rod Brakes
  • Reliable due to fail-safe principle
  • Short switching times
  • High performance density
  • Long service lifetime
  • Clamps without self-reinforcement
Request now
All product information
ROBA®-pinionstop
ROBA®-pinionstop
Shaft Mounted Brakes
Request now
All product information
ROBA®-quick: Electromagnetic, “energize to engage” pole face brake
ROBA®-quick
Energise to engage brakes
  • Installation at the free shaft end
  • High performance density
  • Short switching times
  • Exact position and functionally safe
  • Can be used for 100 % duty cycle
Request now
All product information
ROBA-stop®-S: Waterproof, robust monoblock brake
ROBA-stop®-S
Shaft Mounted Brakes
  • Protection IP67
  • Corrosion-resistant
  • High permitted friction work
  • Anti-condensation heating
  • Release and wear monitoring
Request now
All product information
ROBA-stop®-stage: 100 percent safety – without double the braking torque
ROBA-stop®-stage
Shaft Mounted Brakes
  • Redundant without double the braking torque
  • Ideal for stage technology
  • Installation at the free shaft end
  • Completely assembled and adjusted
Request now
All product information
ROBA®-topstop®: Modular safety system for servomotors
ROBA®-topstop®
Shaft Mounted Brakes
  • Installation A-bearing-side
  • Modular safety system
  • Holds even with the motor removed
Request now
All product information
ROBA®-alphastop®: Safety brake for A-bearing-side attachment onto Fanuc motors
ROBA®-alphastop®
Shaft Mounted Brakes
  • Easy installation
  • Enclosed brake housing
  • Class of insulation F
  • Can be used for 100 % duty cycle
Request now
All product information
ROBA®-duplostop®: Doubled safety brakes for elevator machines
ROBA®-duplostop®
Shaft Mounted Brakes
  • Reliable due to fail-safe principle
  • Easy installation
  • Preset air gap
  • Noise-damped
  • Class of insulation F
Request now
All product information
ROBA®-twinstop®: The perfect elevator brake for compact drives
ROBA®-twinstop®
Shaft Mounted Brakes
  • Redundancy thanks to multiple brake circuits
  • Easy installation
  • Noise-damped
  • Extremely short design
  • Cost-effective
Request now
All product information
ROBA®-secustop: Perfect double brake for chain hoists and hoisting devices
ROBA®-secustop
Shaft Mounted Brakes
  • Class of insulation F
  • Can be used for 100 % duty cycle
  • Noise-damped
  • Easy installation
  • Protection IP54
Request now
All product information
We are happy to advise you
Do you have any questions about our products?
Your enquiry will be processed quickly and competently.
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, 87665 Mauerstetten, Germany
Call us...
Tel. +49 (0)8341 804-0
...or write to us
E-Mail
Write message
Many thanks for your enquiry. We will deal with your request as soon as possible.
FAQ - frequently asked questions

No, not all brake systems are configurable. You can see the corresponding products above - they are marked with the label "Configure now". However, you are welcome to send us a direct enquiry about your desired product at any time!

The mayr® ROBA-stop® brakes are spring-applied, electromagnetic brakes (safety brakes). They ensure a reliable and safe stop of machines and systems when the power is switched off, in case of power failure or emergency stops.

mac-book
new
mayr+ Logo
With mayr+ you can use exclusive functions of our service and information offer.
Learn more