load separating - Safety clutches

load separating: Safety clutches

The load separating torque limiting clutches, such as the torque limiters of the EAS® -series or the force limiting linear clutch EAS®-axial, transmit the torque or the force form locking. The limiting torque is generated via the pre-tensioning of disk springs. Load separating torque limiting clutches separate input and output in case of overload or collision, this means that they interrupt the torque or force transmission.

  • Disengaging overload clutches:
    The disengaging design of our torque limiters separates completely and almost residual torque-free. The clutch remains in this disengaged position until it is re-engaged manually or by means of devices.  Disengaging torque limitingclutches are therefore also particularly suitable for high-speed drives or drives with large mass moments of inertia. The stored rotational energy can run out freely here in the event of a collision.
     
  • Latching torque limiting clutches:
    Input and output are also separated by clutches of the latching type in the event of an overload. In contrast to disengaging versions, however, a  latchingsafety clutch is immediately ready for operation again after the fault has been rectified. Ratcheting clutches automatically re-engage every 15 degrees, synchronous clutches after 360 degrees.
Contact now
EAS®-compact®: The backlash-free, load disconnecting safety clutch configurable
EAS®-compact®
Torque limiters
  • Load separating
  • Stepless torque adjustment
  • Backlash Free
  • High switch-off and repeat accuracy
  • Automatic re-engagement
Configure now
EAS®-compact® F: The backlash-free, load disconnecting safety clutch configurable
EAS®-compact® F
Torque limiters
  • Load separating
  • Backlash Free
  • Free run out
  • Stepless torque adjustment
Configure now
EAS®-axial
Force limiters
  • Stepless torque adjustment
  • Load separating
  • Automatic re-engagement
  • Backlash Free
  • High axial stiffness
Request now
EAS®-dutytorque
Torque limiters
  • Free run out
  • High switch-off and repeat accuracy
  • High balancing quality
  • Long service life
  • Low maintenance
Request now
EAS®-HSE
Torque limiters
  • Free run out
  • High power density
  • High torsional stiffness
  • Completely assembled balanced
  • Load separating
Request now
EAS®-HT
Torque limiters
  • Free run out
  • Long service life
  • Maintenance-free
  • Load separating
Request now
EAS®-HTL
Torque limiters
  • Backlash Free
  • Simple assembly
  • High power density
  • High torsional stiffness
  • Low maintenance
Request now
EAS®-reverse
Torque limiters
  • Simple assembly
  • Stepless torque adjustment
  • Free run out
  • Load separating
Request now
EAS®-smartic®
Torque limiters
  • Simple assembly
  • Low maintenance
  • Backlash Free
  • Easy torque adjustment
  • Load separating
Request now
EAS®-Sp/Sm/Zr
Torque limiters
  • Load separating
  • High switch-off and repeat accuracy
  • Long service life
  • Backlash Free
  • Maintenance-free
Request now
We are happy to advise you
Do you have any questions about our products?
Your enquiry will be processed quickly and competently.
Chr. Mayr GmbH + Co. KG
Eichenstraße 1, 87665 Mauerstetten, Germany
Call us...
Tel. +49 (0)8341 804-0
...or write to us
E-Mail
Write message
Many thanks for your enquiry. We will deal with your request as soon as possible.
mac-book
new
mayr+ Logo
With mayr+ you can use exclusive functions of our service and information offer.