The ROBA®-brake-checker is a smart module for monitoring safety brakes. This means you can monitor the brakes’ status and function constantly. The ROBA®-brake-checker runs without sensor systems built into the brake, has no impact on the design, and is easy to retrofit. The switching device enables plannable maintenance, remote maintenance and maximum operational safety for your brake systems.
A permanent overview of the brake operating conditions
Sensorless monitoring of switching condition, wear, critical coil temperature, and errors
Maximum operational safety due to detection of errors before they occur
Control and monitoring functions all in one possible
Reliable and wear-free, independent of the cycle frequency and the number of cycles
Can be used flexibly for wide ROBA-stop® brake spectrum
Can also be integrated easily, quickly, and cost-effectively into existing systems
Safety becomes visible
In addition to the signal itself, the module also supplies, for example through an optical interface, data on the switching time, the current, the voltage, the resistance, the performance, and the relative attraction current.
Using an evaluation program, users can see whether everything fits or whether there is a need for action.
Maintenance becomes plannable, and even remote maintenance is possible.
ROBA®-brake-checker: Intelligent switching device for brake monitoring
When it comes to safety brakes, compromises are out of the question. With ROBA®-brake-checker, you can equip your brake system with a switching device from the latest generation. The ROBA®-brake-checker constantly monitors your system’s safety brakes: the circuit module warns of any abnormalities before a fault even occurs. With this monitoring module, regular maintenance is a thing of the past.
ROBA®-brake-checker by mayr® power transmission
mayr® power transmission is a market-leading, globally certified company producing safety brakes, torque limiters, and shaft couplings. These design elements are key for the safety of passenger elevators, wind power plants, and in mining and tunnel construction. As a company with a long tradition, mayr® power transmission stands for reliable, highly technically complex development and production.
The ROBA®-brake-checker was developed as a switching device for the purposes of inspection, maintenance, and documentation of our range of ROBA-stop® safety brakes. The ROBA®-brake-checker fits seamlessly into existing systems and is delivered ready for installation. The control modules are also compatible with braking systems from other manufacturers.
Sensorless switching device ROBA®-brake-checker
The ROBA®-brake-checker supplies and monitors safety brakes without sensors. The ROBA®-brake-checker can therefore be retrofitted at any time and requires no specific device. The brake function and status are monitored by the ROBA®-brake-checker by analysing armature disk, voltage, and current. Wear, temperature, and switching condition are constantly examined in order to be able to precisely assess all brake functions. If the control unit detects an abnormality or defect, this is played out using the optical interface and an analysis program. The operator is shown precise information and instructions on the display, e.g. “Service within the next 4 weeks”. This allows wear and defects to be dealt with quickly and effectively . Remote maintenance is also an option in many circumstances with the ROBA®-brake-checker.
