
Product configurator: ROBA® linearstop pneumatic
- Reliable due to fail-safe principle
- Short switching times
- High performance density
- Long service lifetime
- Clamps without self-reinforcement
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 20 | 30 | 40 | 60 | 70 | 80 |
---|---|---|---|---|---|---|
Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 20 | 30 | 40 | 60 | 70 | 80 |
---|---|---|---|---|---|---|
Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 20 | 30 | 40 | 60 | 70 | 80 |
---|---|---|---|---|---|---|
Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
We are happy to advise you
Do you have any questions about our products?
Your enquiry will be processed quickly and competently.
Your enquiry will be processed quickly and competently.
Chr. Mayr GmbH + Co. KG
Eichenstraße 1,
87665 Mauerstetten,
Germany
Call us...
Tel.
+49 (0)8341 804-0
...or write to us
E-Mail
Write message
Product features
- Construction - Protection class
- Protection IP54
- Assembly and maintenance
- Low-maintenance
- Easy installation
- Sound
- Not noise-damped
- Normally no noise development
- Duty cycle
- Can be used for 100 % duty cycle
- Benefits
- Short switching times
- High performance density
- Long service lifetime
- Clamps without self-reinforcement
- Backlash-free
- Application
- Optimal for vertical axes
- Can easily be integrated into existing constructions
- Mounting position
- On the piston rod
- Safety
- Reliable due to fail-safe principle
- Switching condition monitoring
- Suitable for EMERGENCY STOP braking
- High CCF value possible
- Design
- Pneumatic
- Temperature
- Possible ambient temperature of -10 °C to 70 °C (non-condensing)