Product configurator: ROBA® linearstop pneumatic
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Do you have questions about the product ROBA® linearstop pneumatic?
Whether it's technical details, application options or specific requirements – we're happy to assist you.
Your inquiry will be answered promptly and personally by our experts.
Your inquiry will be answered promptly and personally by our experts.
Write message
alternatively call us
Tel.
+49 (0)8341 804-0
...or write to us by e-mail
E-Mail
Product features
- Construction - Protection class
- Protection IP54
- Assembly and maintenance
- Low-maintenance
- Easy installation
- Sound
- Not noise-damped
- Normally no noise development
- Duty cycle
- Can be used for 100 % duty cycle
- Benefits
- Short switching times
- High performance density
- Long service lifetime
- Clamps without self-reinforcement
- Backlash-free
- Application
- Optimal for vertical axes
- Can easily be integrated into existing constructions
- Mounting position
- On the piston rod
- Safety
- Reliable due to fail-safe principle
- Switching condition monitoring
- Suitable for EMERGENCY STOP braking
- High CCF value possible
- Design
- Pneumatic
- Temperature
- Possible ambient temperature of -10 °C to 70 °C (non-condensing)
Downloads
Available languages
Download
or scan
pdf | 3,01 MB
Language: en
Date: 19.01.2022
Available languages
Download
or scan
pdf | 747,64 KB
Language: en
Date: 21.09.2022
Available languages
EN
DE
Validation Aid Release
mayr® validation aid documents provide machine manufacturers with essential information—beyond the standard B10d (MTTFD) safety values—required for validating the selected product in accordance with DIN EN ISO 13849-2.
If you are using special versions, identifiable by the suffix “S” in the type designation, the applicability of the validation aid must be verified.
Please contact mayr® with the 7-digit mayr® article number to confirm whether the available validation support is approved for your special version.
