ES
Como freno de seguridad para varillas sobre piñón, ROBA® linearstop ofrece posibilidades únicas para aumentar la seguridad de las máquinas: puede integrarse de manera rápida y sencilla, sin laboriosos trabajos de ajuste, en construcciones de máquinas e instalaciones ya existentes, y está especialmente diseñado para asegurar ejes verticales. Obtener un sistema de frenado redundante y diversificado es relativamente sencillo al combinar ROBA® linearstop con otro freno. Dado que el ROBA® linearstop frena independientemente del sistema de accionamiento existente, la evaluación de la seguridad resulta más sencilla. La eficacia de frenado es independiente de la dirección del movimiento, por lo que no es necesario liberar el eje tras el frenado. ROBA® linearstop carece de holgura, es adecuado para frenadas de parada de emergencia y destaca por sus tiempos de conexión cortos.
Download catalogue
ROBA® linearstop neumático
Here you will get:
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
mayr® validation aid documents provide machine manufacturers with essential information—beyond the standard B10d (MTTFD) safety values—required for validating the selected product in accordance with DIN EN ISO 13849-2.
If you are using special versions, identifiable by the suffix “S” in the type designation, the applicability of the validation aid must be verified.
Please contact mayr® with the 7-digit mayr® article number to confirm whether the available validation support is approved for your special version.
