Product configurator: ROBA® linearstop neumático
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Do you have questions about the product ROBA® linearstop neumático?
Whether it's technical details, application options or specific requirements – we're happy to assist you.
Your inquiry will be answered promptly and personally by our experts.
Your inquiry will be answered promptly and personally by our experts.
Escriba un mensaje
alternatively call us
Tel.
+49 (0)8341 804-0
...o escríbenos por correo
Correo electrónico
Características
- Tipo de diseño y de protección
- Tipo de protección IP54
- Montaje y mantenimiento
- Mantenimiento reducido
- Montaje sencillo
- Acústica
- Ruidos no amortiguados
- Por lo general, no se genera ruido.
- Ciclo de servicio
- Posibilidad de uso durante el 100 % del ciclo de servicio
- Ventajas
- Tiempos de conexión breves
- Elevada densidad de potencia
- Larga vida útil
- Se bloquea sin autorrefuerzo
- Sin juego
- Aplicación
- Óptimo para ejes verticales
- Integración sencilla en diseños existentes
- Posición de montaje
- En el pistón
- Seguridad
- Seguro gracias al principio de seguridad "fail-safe"
- Control del estado de conexión
- Apto para frenadas de parada de emergencia
- Posibilidad de valor CCF elevado
- Versión
- Neumático
- Temperatura
- Possible ambient temperature of -10 °C to 70 °C (non-condensing)
Descargas
Available languages
Descargar
or scan
pdf | 3,01 MB
Idioma: en
Date: 19.01.2022
Available languages
Descargar
or scan
pdf | 747,64 KB
Idioma: en
Date: 21.09.2022
Available languages
EN
DE
Validation Aid Release
mayr® validation aid documents provide machine manufacturers with essential information—beyond the standard B10d (MTTFD) safety values—required for validating the selected product in accordance with DIN EN ISO 13849-2.
If you are using special versions, identifiable by the suffix “S” in the type designation, the applicability of the validation aid must be verified.
Please contact mayr® with the 7-digit mayr® article number to confirm whether the available validation support is approved for your special version.
