ROBA® DS para sensores de torque: Acoplamentos de eixos sem folga para sensores de torque

Conexão standard à flange de medição de torque HBK
Adequado para rotações muito elevadas
Variantes leves disponíveis

ROBA®-DS couplings of the type series 9110, 9120 and 9210 are especially adapted for the attachment of HBM torque transducers. Different material variants and designs as well as flexible combination possibilities allow the integration of measurement flanges into almost every test stand and drive constellation. ROBA® DS disk pack couplings of the 9110, 9120, 9210 type series are characterized by increased manufacturing quality, optimized balancing quality, high permitted speeds and torques as well as minimal parasitic loads. With the EAS® HSE, a matching safety clutch is available.

Características

Aplicação
Para sensores de torque HBM

Design
Rígido em torque
Sistema de construção modular flexível

Vantagens
Compensação de desalinhamentos axiais, radiais e angulares
Sem folga

Temperatura
Temperatura permanente até +120 °C

Application example

Product configurator

ROBA® DS para sensores de torque

Here you will get:

Desenhos em PDF e TIFF
Ficheiros de troca CAD 2D e 3D
(IGES, STEP, DXF)
An individual offer

External shrink disk hub with connection plate

Preferred variant - shortest and most rigid design
Compact design, low mass moment of inertia
Quick installation
External clamping of the shrink disks

Seleccione

External shrink disk hub with sleeve

Low mass moment of inertia design
Quick installation
External clamping of the shrink disks

Seleccione

Internal shrink disk hub with connection plate

Internal clamping on the load side
Higher mass moment of inertia compared to preferred design
Complex installation compared to preferred design

Seleccione

Internal shrink disk hub with sleeve

Internal clamping on the load side
Higher mass moment of inertia compared to preferred design
Complex installation compared to preferred design

Seleccione

External shrink disk hub, sandwich-design

Maximum misalignment compensation, shortest possible design
Higher mass moment of inertia compared to preferred design
Complex installation compared to preferred design
External clamping of the shrink disks

Seleccione

High-speed design

Individual parts manufactured to a high level of accuracy (IT5 quality) with restricted axial run-out and shaft run-out tolerance.
Balanced according to DIN ISO 1940 to a balance quality of G 2.5 at n = 5000 rpm

Seleccione

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	300	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	450	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	30.000	30.000	25.000	20.000	16.000	13.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	200	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	200	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	200	500 / 1000	2000 / 3000	5.000	10.000

Media and downloads

Available languages

pdf | 1,9 MB Idioma: en Date: 04.10.2018

Available languages

pdf | 1,34 MB Idioma: en Date: 11.11.2021

Available languages

pdf | 1,22 MB Idioma: en Date: 25.09.2024

We are happy to advise you

Do you have any questions about our products?
Your enquiry will be processed quickly and competently.

Chr. Mayr GmbH + Co. KG

Eichenstraße 1, 87665 Mauerstetten, Alemanha

Call us...

Tel. +49 (0)8341 804-0

...or write to us

E-Mail

Escrever uma mensagem