PT
The ready-to-install safety brake module ROBA® topstop® is the easiest way of increasing the safety of vertical axes. The safety brake holds the load even when the motor has been removed. As its flange dimensions are adapted to match the servo motor and gearbox, it can be easily integrated or retrofitted. The design with hollow shaft on both sides and an integrated shaft coupling allows spindle shafts to be directly connected. Additionally, the next generation of ROBA® topstop® is also optimized for functional safety in accordance with DIN EN ISO 13849-1 and the static brake test. In combination with the ROBA® brake-checker® and the ROBA® gateway, it also opens the door to the world of IoT.
The previous generation of the ROBA® topstop® remains available to you for existing applications.
ROBA® topstop®
Aqui obterá:
Tip: Clique na coluna adequada para si para configurar o produto em detalhe.
| Tamanho | 100 | 120 | 150 | 175 1 | 200 | 260 1 |
|---|---|---|---|---|---|---|
| Flange quadrada [mm] | 100 | 130 | 155 | 176 | 194 | 264 |
| Torque de frenagem nominal padrão MN [Nm] | 6 | 12 | 45 | 70 | 100 | 200 |
| Torque de frenagem nominal aumentado [Nm] | 12 | 30 | 90 | 120 | 160 | 400 |
| Diâmetro do eixo [mm] | 14 / 19 | 19 / 24 | 24 / 32 | 35 | 32 / 38 | 42 / 48 / 55 |
| Diâmetro do furo [mm] | 14 / 19 | 19 / 24 | 24 / 32 | 35 | 32 / 38 | 42 / 48 / 55 |
| Diâmetro de centragem [mm] | 80 / 95 | 95 / 110 | 110 / 130 | 114,3 | 130 / 180 | 250 |
Tip: Clique na coluna adequada para si para configurar o produto em detalhe.
| Tamanho | 120 | 150 | 175 1 | 200 | 260 1 |
|---|---|---|---|---|---|
| Flange quadrada [mm] | 130 | 155 | 176 | 194 | 264 |
| Torque de frenagem nominal padrão MN [Nm] | 12 | 45 | 70 | 100 | 200 |
| Torque de frenagem nominal aumentado [Nm] | 30 | 90 | 120 | 160 | 400 |
| Diâmetro do eixo [mm] | 19 / 24 | 24 / 32 | 35 | 32 / 38 | 42 / 48 / 55 |
| Diâmetro do furo do cubo de aperto [mm] | 15 - 32 | 19 - 38 | 20 - 45 | 20 - 45 | 35 - 55 |
| Diâmetro do furo do cubo com anel de aperto [mm] | 15 - 28 | 19 - 38 | 20 - 45 | 20 - 45 | 35 - 60 |
| Diâmetro de centragem [mm] | 95 / 110 | 110 / 130 | 114,3 | 130 / 180 | 250 |
Tip: Clique na coluna adequada para si para configurar o produto em detalhe.
| Tamanho | 120 | 150 | 175 1 | 200 | 260 1 |
|---|---|---|---|---|---|
| Flange quadrada [mm] | 130 | 155 | 176 | 194 | 264 |
| Torque de frenagem nominal padrão MN [Nm] | 12 | 45 | 70 | 100 | 200 |
| Torque de frenagem nominal aumentado [Nm] | 30 | 90 | 120 | 160 | 400 |
| Diâmetro do furo do cubo de aperto [mm] | 15 - 32 | 19 - 38 | 20 - 45 | 20 - 45 | 35 - 55 |
| Diâmetro do furo do cubo com anel de aperto [mm] | 15 - 28 | 19 - 38 | 20 - 45 | 20 - 45 | 35 - 60 |
| Diâmetro de centragem [mm] | 95 / 110 | 110 / 130 | 114,3 | 130 / 180 | 250 |
mayr® validation aid documents provide machine manufacturers with essential information—beyond the standard B10d (MTTFD) safety values—required for validating the selected product in accordance with DIN EN ISO 13849-2.
If you are using special versions, identifiable by the suffix “S” in the type designation, the applicability of the validation aid must be verified.
Please contact mayr® with the 7-digit mayr® article number to confirm whether the available validation support is approved for your special version.
