Product configurator: ROBA® linearstop pneumático
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 20 | 30 | 40 | 60 | 70 | 80 |
|---|---|---|---|---|---|---|
| Piston rod diameter d [mm] | 16 | 20 | 20 | 25 | 32 | 40 |
| Outer diameter D [mm] | 46 | 56 | 70 | 110 | 140 | 178 |
| min. Nominal holding force at 4,0 bar FN min [N] | 450 | 800 | 1.500 | 4.600 | 7.500 | 12.500 |
| max. Nominal holding force at 4,0 bar FN max [N] | 750 | 1.400 | 2.650 | 8.200 | 13.000 | 23.000 |
| min. Nominal holding force at 4,5 bar FN min [N] | 525 | 950 | 1.800 | 5.300 | 8.500 | 14.500 |
| max. Nominal holding force at 4,5 bar FN max [N] | 875 | 1.600 | 3.050 | 9.500 | 15.200 | 26.500 |
| min. Nominal holding force at 5,0 bar FN min [N] | 575 | 1.050 | 2.000 | 6.000 | 9.600 | 16.500 |
| max. Nominal holding force at 5,0 bar FN max [N] | 1.000 | 1.800 | 3.500 | 10.900 | 17.500 | 30.500 |
| min. Nominal holding force at 5,5 bar FN min [N] | 650 | 1.200 | 2.250 | 6.700 | 10.800 | 18.500 |
| max. Nominal holding force at 5,5 bar FN max [N] | 1.100 | 2.000 | 3.950 | 12.300 | 19.700 | 35.000 |
| min. Nominal holding force at 6,0 bar FN min [N] | 700 | 1.300 | 2.500 | 7.500 | 12.000 | 21.000 |
| max. Nominal holding force at 6,0 bar FN max [N] | 1.200 | 2.200 | 4.400 | 13.800 | 22.500 | 40.000 |
The max. product properties listed above may change during the configuration process. Please note the final product specification in the information text or in the final configuration drawing.
Do you have questions about the product ROBA® linearstop pneumático?
Whether it's technical details, application options or specific requirements – we're happy to assist you.
Your inquiry will be answered promptly and personally by our experts.
Your inquiry will be answered promptly and personally by our experts.
Escrever uma mensagem
alternatively call us
Tel.
+49 (0)8341 804-0
...ou envie-nos um e-mail
E-Mail
Características
- Tipo de construção - Tipo de proteção
- Tipo de proteção IP54
- Montagem e manutenção
- Baixa manutenção
- Montagem fácil
- Ruído
- Ruído não silenciado
- No geral sem emissão de ruído
- Ciclo de serviço
- Podem ser usados para ciclo de serviço de 100%
- Vantagens
- Curtos tempos de resposta
- Alta densidade de potência
- Longa vida útil
- Fixação sem auto-reforço
- Sem folga
- Aplicação
- Ideal para eixos verticais
- Fácil integração em construções já existentes
- Posição de montagem
- Na haste
- Segurança
- Seguro pelo princípio Fail-safe
- Monitor de estado de comutação
- Adequado para frenagens de PARADA DE EMERGÊNCIA
- Possível valor CFF elevado
- Design
- Pneumático
- Temperatura
- Possible ambient temperature of -10 °C to 70 °C (non-condensing)
Downloads
Available languages
Descarregar
or scan
pdf | 2,84 MB
Idioma: pt
Date: 03.05.2016
Available languages
Descarregar
or scan
pdf | 747,64 KB
Idioma: en
Date: 21.09.2022
Available languages
EN
DE
Validation Aid Release
mayr® validation aid documents provide machine manufacturers with essential information—beyond the standard B10d (MTTFD) safety values—required for validating the selected product in accordance with DIN EN ISO 13849-2.
If you are using special versions, identifiable by the suffix “S” in the type designation, the applicability of the validation aid must be verified.
Please contact mayr® with the 7-digit mayr® article number to confirm whether the available validation support is approved for your special version.
