The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.
TR
ROBA® kayar göbekler friksiyonlu tork limitleyicilerdir.
Ayarlanan tork aşıldığında (aşırı yük durumu) tahrik elemanı kayarak torku sınırlar.
Tork limitleyicinin balatalarının aşırı ısınmaması için sürtünme gücü parametresi (kayma devri, kayma süresi ve ayarlanan tork) aşılmamalıdır.
Download catalogue
ROBA® kayar göbekler
Here you will get:
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 2 | 6 | 14 | 26 | 50 | 110 | 140 | 240 | 400 | 680 | 1200 |
| max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1600 | 2100 | 2400 | 4000 | 6800 | 12000 |
| min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 | 25 | 30 | 40 | 48 | 60 | 57 |
| max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 | 80 | 100 | 120 | 140 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 8 | 16 | 40 | 80 | 110 |
| max. Limit torque for overload MG max [Nm] | 80 | 160 | 400 | 800 | 1100 |
| min. Hub bore dmin [mm] | 12 | 15 | 19 | 25 | 30 |
| max. Hub bore dmax [mm] | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 18 | 60 | 130 | 250 | 550 | 1100 | 1400 |
| max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1600 | 2100 |
| min. Hub bore dmin [mm] | 10 | 12 | 12 | 15 | 20 | 25 | 30 |
| max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 2 | 14 | 26 | 50 | 110 | 140 | 240 |
| max. Limit torque for overload MG max [Nm] | 20 | 130 | 250 | 550 | 1100 | 1400 | 2400 |
| min. Hub bore dmin [mm] | 7 | 12 | 15 | 19 | 25 | 30 | 40 |
| max. Hub bore dmax [mm] | 20 | 25 | 35 | 45 | 55 | 65 | 80 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 01 | 1 | 2 | 3 |
|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | - | 6 | 14 | 26 | 50 |
| max. Limit torque for overload MG max [Nm] | - | 60 | 130 | 250 | 550 |
| min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 |
| max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 4 | 5 |
|---|---|---|
| min. Limit torque for overload MG min [Nm] | 110 | 140 |
| max. Limit torque for overload MG max [Nm] | 1100 | 1400 |
| min. Hub bore dmin [mm] | 25 | 30 |
| max. Hub bore dmax [mm] | 55 | 65 |
The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.
