用于扭矩传感器的ROBA® DS: 用于扭矩传感器的零间隙联轴器

标准连接至HBK扭矩测量法兰
适用于极高的转速
可提供轻量化型号

9110、9120和9210系列的ROBA® DS离合器专为安装HBK扭矩传感器设计。多样化的材料变体、结构型式和灵活的组合方式使其无论面对何种检测台和驱动状况都能顺利完成对测量法兰的集成。9110、9120和9210系列的ROBA® DS膜片离合器制造质量更高、动平衡质量经过优化、允许的转速和扭矩较高，并且寄生负载极小。EAS® HSE提供适配的安全离合器。

特点

应用
用于 HBM 扭矩传感器

规格
旋转刚性
灵活的模块化结构

优点
补偿轴向、径向和角度轴偏移
零间隙

温度
持续温度最高达 +120 °C

Application example

Product configurator

用于扭矩传感器的ROBA® DS

Here you will get:

绘图为PDF和TIFF
二维和三维CAD交换文件
(IGES, STEP, DXF)
An individual offer

External shrink disk hub with connection plate

Preferred variant - shortest and most rigid design
Compact design, low mass moment of inertia
Quick installation
External clamping of the shrink disks

选择

External shrink disk hub with sleeve

Low mass moment of inertia design
Quick installation
External clamping of the shrink disks

选择

Internal shrink disk hub with connection plate

Internal clamping on the load side
Higher mass moment of inertia compared to preferred design
Complex installation compared to preferred design

选择

Internal shrink disk hub with sleeve

Internal clamping on the load side
Higher mass moment of inertia compared to preferred design
Complex installation compared to preferred design

选择

External shrink disk hub, sandwich-design

Maximum misalignment compensation, shortest possible design
Higher mass moment of inertia compared to preferred design
Complex installation compared to preferred design
External clamping of the shrink disks

选择

High-speed design

Individual parts manufactured to a high level of accuracy (IT5 quality) with restricted axial run-out and shaft run-out tolerance.
Balanced according to DIN ISO 1940 to a balance quality of G 2.5 at n = 5000 rpm

选择

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	190	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	285	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	18.000	18.000	15.000	12.000	10.000	8.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	100	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	50 / 100	500 / 1000	2000 / 3000	5.000	10.000

Size	16	16F	64	300	500	850
Nominal torque T_KN [Nm]	300	300	1.100	3.500	5.800	10.000
Peak torque T_KS [Nm]	450	450	1.650	5.250	8.700	14.250
max. Speed n_max [min^-1]	30.000	30.000	25.000	20.000	16.000	13.000
min. Hub bore d_min [mm]	25	25	45	50	60	70
Measurement flange co. HBM TB2 [Nm]	200	200	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T12HP (T12/T10FS) [Nm]	200	200	500 / 1000	2000 / 3000	5.000	10.000
Measurement flange co. HBM T40B (T40) [Nm]	200	200	500 / 1000	2000 / 3000	5.000	10.000

Media and downloads

Available languages

pdf | 2,1 MB 语言: zh Date: 27.05.2020

Available languages

pdf | 1,68 MB 语言: en Date: -

Available languages

pdf | 1,34 MB 语言: en Date: 11.11.2021

Available languages

pdf | 1,22 MB 语言: en Date: 25.09.2024

We are happy to advise you

Do you have any questions about our products?
Your enquiry will be processed quickly and competently.

Chr. Mayr GmbH + Co. KG

Eichenstraße 1, 87665 Mauerstetten, 德国

Call us...

电话。 +49 (0)8341 804-0

...or write to us

电子邮件

写留言