ROBA®-duplostop®: Safety brake in a double pack for elevator drives

ROBA®-duplostop®: Safety brake in a double pack for elevator drives

  • Safe due to fail-safe principle
  • Simple assembly
  • Preset air gap
  • Silenced
  • Insulation class F

The ROBA®-duplostop® is a redundant safety brake for elevator drives.

 

The ROBA®-duplostop® brake is a quiescent current actuated, electromagnetic safety brake.

In the de-energised state, springs press against the armature disks. The rotor is thus held between the armature disks and the respective screw mounting surface of the machine. The motor shaft is braked via the rotor.  

When the current is switched on, a magnetic field builds up. The armature disks are pulled against the spring pressure to the coil carrier. The rotor is free and the shaft can pass freely.

Download catalogue

Caratteristiche

  • Application
  • Reduntant safety brake for elevator drives
  • Mounting position
  • Mounting on the free shaft end
  • Safety
  • Safe due to fail-safe principle
  • Switching status monitoring
  • Suitable for EMERGENCY STOP braking.
  • Redundancy through two independent braking circuits (EN 81)
  • Approved as protection against overspeed upwards
  • Design
  • Electromagnetic
  • Features
  • Rotary manual release for Bowden cable or with manual air lever possible
  • Encoder mounting possible without increasing the overall length
  • Construction - Protection class
  • Mechanical: Protection class IP 10
  • Electrical: Protection class IP 54
  • Assembly and maintenance
  • Simple assembly
  • Preset air gap
  • Sound
  • Soundproofed
  • Temperature
  • Insulation class F
  • Duty cycle
  • Applicable up to 60% ED

Esempi di applicazione

Certificazioni

CSA
TÜV