Slim brake for installation both in the A-bearing side and in the B-bearing side of servomotors and as a robot brake for installation in joints of lightweight robots.
Operation with overexcitation and power reduction.
The ROBA®-servostop® Lean is a closed-circuit, electromagnetic safety brake.
When the brake is closed, the rotor is held between the armature disk and the flange plate by the friction linings. When the current of the built-in solenoid is switched on, the magnetic field pulls the armature disk against the force of the springs to the coil carrier. The brake is released.Download catalogue
Here you will get:
Tip: Click on the column that is appropriate to you to configure the product in detail.
|Braking torque MN [Nm]||0,31||0,7||1,9||3,7||5,5||7,9||11,5|
|Overexcitation voltage UO [VDC]||24||24||24||24||24||24||24|
|Holding Voltage UH [VDC]||8||8||8||8||8||8||8|
|max. Speed nmax [min-1]||10.500||8.500||7.000||6.500||5.500||5.000||4.500|
|max. Idle speed [min-1]||21.000||16.500||14.000||12.500||10.500||10.000||9.000|
|min. Hub bore d1 min [mm]||8||10||12||12||15||23||20|
|max. Hub bore d1 max [mm]||12||20||25||25||30||35||37|
|Outer diameter H [mm]||48||58||68||78||88||98||108|
|Length L [mm]||16,35||19,15||21,15||23,3||23,3||25,4||25,9|