ROBA®-diskstop®

ROBA®-diskstop®: Safety brake system for brake discs

  • Simple assembly
  • Low maintenance
  • Insulation class F
  • Safe due to fail-safe principle
  • For high braking torques
  • ROBA®-diskstop® safety brakes are designed as a protective device against overspeed of the ascending car and against uncontrolled movements when the lift door is open.
  • The ROBA®-diskstop® is suitable for large braking torques.
     

Limits of use

  • direct sunlight or UV light

 

The ROBA®-diskstop® brake is an electromagnetic safety brake actuated by quiescent current.

In the de-energised state, springs press the armature disk against the brake disk. The brake disc is held between the lining carriers.

When a voltage is applied, the magnetic force of the coil in the coil carrier pulls the armature disk against the coil carrier against the spring pressure. The brake is released and the brake disc can pass through.

Download catalogue

Características

  • Application
  • For high braking torques
  • Mounting position
  • On the brake disc, e.g. of cable drums
  • Safety
  • Safe due to fail-safe principle
  • Switching status monitoring
  • Suitable for EMERGENCY STOP braking.
  • Redundancy can be implemented by second brake (SIL 3, PL e)
  • Benefits
  • High power density
  • Design
  • Electromagnetic
  • Features
  • Patented clearance for grinding-free operation
  • Construction - Protection class
  • Mechanical: Protection class IP 10
  • Electrical: Protection class IP 54
  • Assembly and maintenance
  • Simple assembly
  • Low maintenance
  • Sound
  • Soundproofed
  • Temperature
  • Insulation class F
  • Duty cycle
  • Applicable up to 60% ED
  • Longer duty cycle possible after consultation.

Ejemplos de aplicación

Certificaciones

CSA
UL
TÜV