The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.
ES
El limitador de par de fricción ROBA® es un limitador de par mediante fricción.
Al sobrepasarse el par de giro ajustado (sobrecarga), el elemento de transmisión se desliza y limita al hacerlo el par de giro.
No se pueden superar los parámetros de fricción (velocidad de deslizamiento, tiempo de deslizamiento y par de giro ajustado) para evitar sobrecalentar los forros de fricción del limitador de par.
Download catalogue
Limitador de par de fricción ROBA®
Here you will get:
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 2 | 6 | 14 | 26 | 50 | 110 | 140 | 240 | 400 | 680 | 1.200 |
| max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1.600 | 2.100 | 2.400 | 4.000 | 6.800 | 12.000 |
| min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 | 25 | 30 | 40 | 48 | 60 | 57 |
| max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 | 80 | 100 | 120 | 140 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 8 | 16 | 40 | 80 | 110 |
| max. Limit torque for overload MG max [Nm] | 80 | 160 | 400 | 800 | 1.100 |
| min. Hub bore dmin [mm] | 12 | 15 | 19 | 25 | 30 |
| max. Hub bore dmax [mm] | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 18 | 60 | 130 | 250 | 550 | 1.100 | 1.400 |
| max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1.600 | 2.100 |
| min. Hub bore dmin [mm] | 10 | 12 | 12 | 15 | 20 | 25 | 30 |
| max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
|---|---|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | 2 | 14 | 26 | 50 | 110 | 140 | 240 |
| max. Limit torque for overload MG max [Nm] | 20 | 130 | 250 | 550 | 1.100 | 1.400 | 2.400 |
| min. Hub bore dmin [mm] | 7 | 12 | 15 | 19 | 25 | 30 | 40 |
| max. Hub bore dmax [mm] | 20 | 25 | 35 | 45 | 55 | 65 | 80 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 0 | 01 | 1 | 2 | 3 |
|---|---|---|---|---|---|
| min. Limit torque for overload MG min [Nm] | - | 6 | 14 | 26 | 50 |
| max. Limit torque for overload MG max [Nm] | - | 60 | 130 | 250 | 550 |
| min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 |
| max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
| Size | 4 | 5 |
|---|---|---|
| min. Limit torque for overload MG min [Nm] | 110 | 140 |
| max. Limit torque for overload MG max [Nm] | 1.100 | 1.400 |
| min. Hub bore dmin [mm] | 25 | 30 |
| max. Hub bore dmax [mm] | 55 | 65 |
The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.
