The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.
ROBA® представляет собой фрикционную предохранительную муфту.
При превышении установленного значения крутящего момента (в случае перегрузки) элемент привода проскальзывает, чем ограничивает крутящий момент.
Чтобы фрикционные накладки предохранительной муфты не перегревались, недопустимо превышать параметры мощности трения (обороты проскальзывания, время проскальзывания и установленный крутящий момент).
Download catalogueROBA®–RN проскальзывающая муфта
Here you will get:
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
---|---|---|---|---|---|---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 2 | 6 | 14 | 26 | 50 | 110 | 140 | 240 | 400 | 680 | 1200 |
max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1600 | 2100 | 2400 | 4000 | 6800 | 12000 |
min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 | 25 | 30 | 40 | 48 | 60 | 57 |
max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 | 80 | 100 | 120 | 140 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 8 | 16 | 40 | 80 | 110 |
max. Limit torque for overload MG max [Nm] | 80 | 160 | 400 | 800 | 1100 |
min. Hub bore dmin [mm] | 12 | 15 | 19 | 25 | 30 |
max. Hub bore dmax [mm] | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 18 | 60 | 130 | 250 | 550 | 1100 | 1400 |
max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1600 | 2100 |
min. Hub bore dmin [mm] | 10 | 12 | 12 | 15 | 20 | 25 | 30 |
max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
---|---|---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 2 | 14 | 26 | 50 | 110 | 140 | 240 |
max. Limit torque for overload MG max [Nm] | 20 | 130 | 250 | 550 | 1100 | 1400 | 2400 |
min. Hub bore dmin [mm] | 7 | 12 | 15 | 19 | 25 | 30 | 40 |
max. Hub bore dmax [mm] | 20 | 25 | 35 | 45 | 55 | 65 | 80 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 01 | 1 | 2 | 3 |
---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | - | 6 | 14 | 26 | 50 |
max. Limit torque for overload MG max [Nm] | - | 60 | 130 | 250 | 550 |
min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 |
max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 4 | 5 |
---|---|---|
min. Limit torque for overload MG min [Nm] | 110 | 140 |
max. Limit torque for overload MG max [Nm] | 1100 | 1400 |
min. Hub bore dmin [mm] | 25 | 30 |
max. Hub bore dmax [mm] | 55 | 65 |
The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.