The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.
EN
The ROBA® -slip hub is a frictionally engaged safety clutch.
If the set torque is exceeded (overload case), the drive element slips and thus limits the torque.
Download catalogueROBA®-slip hub
Here you will get:
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
---|---|---|---|---|---|---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 2 | 6 | 14 | 26 | 50 | 110 | 140 | 240 | 400 | 680 | 1200 |
max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1600 | 2100 | 2400 | 4000 | 6800 | 12000 |
min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 | 25 | 30 | 40 | 48 | 60 | 57 |
max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 | 80 | 100 | 120 | 140 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 8 | 16 | 40 | 80 | 110 |
max. Limit torque for overload MG max [Nm] | 80 | 160 | 400 | 800 | 1100 |
min. Hub bore dmin [mm] | 12 | 15 | 19 | 25 | 30 |
max. Hub bore dmax [mm] | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 01 | 1 | 2 | 3 | 4 | 5 |
---|---|---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 18 | 60 | 130 | 250 | 550 | 1100 | 1400 |
max. Limit torque for overload MG max [Nm] | 30 | 90 | 200 | 400 | 800 | 1600 | 2100 |
min. Hub bore dmin [mm] | 10 | 12 | 12 | 15 | 20 | 25 | 30 |
max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 | 55 | 65 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 1 | 2 | 3 | 4 | 5 | 6 |
---|---|---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | 2 | 14 | 26 | 50 | 110 | 140 | 240 |
max. Limit torque for overload MG max [Nm] | 20 | 130 | 250 | 550 | 1100 | 1400 | 2400 |
min. Hub bore dmin [mm] | 7 | 12 | 15 | 19 | 25 | 30 | 40 |
max. Hub bore dmax [mm] | 20 | 25 | 35 | 45 | 55 | 65 | 80 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 0 | 01 | 1 | 2 | 3 |
---|---|---|---|---|---|
min. Limit torque for overload MG min [Nm] | - | 6 | 14 | 26 | 50 |
max. Limit torque for overload MG max [Nm] | - | 60 | 130 | 250 | 550 |
min. Hub bore dmin [mm] | 7 | 12 | 12 | 15 | 19 |
max. Hub bore dmax [mm] | 20 | 22 | 25 | 35 | 45 |
Tip: Click on the column that is appropriate to you to configure the product in detail.
Size | 4 | 5 |
---|---|---|
min. Limit torque for overload MG min [Nm] | 110 | 140 |
max. Limit torque for overload MG max [Nm] | 1100 | 1400 |
min. Hub bore dmin [mm] | 25 | 30 |
max. Hub bore dmax [mm] | 55 | 65 |
The friction power parameters (slipping speed, slipping time and set torque) must not be exceeded in order not to overheat the friction linings of the torque limiting clutch.